Safety-Contact-Strip SENTIR edge 18 T

The Safety-Contact-Strip is used as a switching element which closes as soon as it meets an obstruction. The materials and the clear geometrical form are major advantages in comparison to other methods.

Its absolutely homogeneous insulating covering of Elastomere has a very conductive elastic material on the inside which act as contact surfaces. In this material is a thin copper wire which allows a very low resistance even for long lengths.

The quality of the contact is very good as the elastic material on the inside of the strip is a guaranty that the contact, once made is not permanent and theat the Safety-Contact-Strip will take up its original shape when the obstruction is removed.

The Safety-Contact-Strip is used mostly in rubber profiles mounted on aluminium rails to protect it from being damaged and to enable a long, soft brake way. Different end resistances and values are possible. The use of the Safety-Contact-Strip is continually tested and licensed from approved institutions in compliance with the German employers´ liability insurance association. The test certificates are available on request.

Safety-Contact-Strip SENTIR edge 18 T

The Safety-Contact-Strip is used as a switching element which closes as soon as it meets an obstruction. The materials and the clear geometrical form are major advantages in comparison to other methods.

Its absolutely homogeneous insulating covering of Elastomere has a very conductive elastic material on the inside which act as contact surfaces. In this material is a thin copper wire which allows a very low resistance even for long lengths.

The quality of the contact is very good as the elastic material on the inside of the strip is a guaranty that the contact, once made is not permanent and theat the Safety-Contact-Strip will take up its original shape when the obstruction is removed.

The Safety-Contact-Strip is used mostly in rubber profiles mounted on aluminium rails to protect it from being damaged and to enable a long, soft brake way. Different end resistances and values are possible. The use of the Safety-Contact-Strip is continually tested and licensed from approved institutions in compliance with the German employers´ liability insurance association. The test certificates are available on request.

Safety-Contact-Strip SENTIR edge 18 T

The Safety-Contact-Strip is used as a switching element which closes as soon as it meets an obstruction. The materials and the clear geometrical form are major advantages in comparison to other methods.

Its absolutely homogeneous insulating covering of Elastomere has a very conductive elastic material on the inside which act as contact surfaces. In this material is a thin copper wire which allows a very low resistance even for long lengths.

The quality of the contact is very good as the elastic material on the inside of the strip is a guaranty that the contact, once made is not permanent and theat the Safety-Contact-Strip will take up its original shape when the obstruction is removed.

The Safety-Contact-Strip is used mostly in rubber profiles mounted on aluminium rails to protect it from being damaged and to enable a long, soft brake way. Different end resistances and values are possible. The use of the Safety-Contact-Strip is continually tested and licensed from approved institutions in compliance with the German employers´ liability insurance association. The test certificates are available on request.